Servo Motors vs. Stepper Motors

Basic Description

Although both stepper motors and a servo-motors allow for rotor position control, they are two very different mechanisms. Technically a servo-motor is any type of motor (AC/DC/stepper) with a closed loop controller. While a stepper motor operates without feedback, controlling the rotor’s position by rotating a set number of degrees for each input pulse.

The feedback to a servo-motor is usually in the form of a position sensor or rotary encoder attached to the motor’s rotor. The rotary encoder converts the angular position of the rotor relative to the stator into an electrical signal that is fed back to the motor controller. The motor controller then uses this information to precisely position the rotor.

The most common type of servo-motor is an RC servo which employs a DC motor, reduction gear, and servo controller, all within the motor housing. They are controlled using PWM where the length of the pulse dictates how far the rotor rotates. This type of motor is commonly used to precisely actuate mechanical components on radio-controlled (RC) models or robotics.

Manufacturers of Servo Motors

AMP, API Controls, Baldor, Globe, MCG, Powertec

Manufacturers of RC Servo Motors

Futaba, GWS, HiTEC

For More Information

[1] Basic of Servomotor Control, Nippon Pulse Motor Co.

[2] Servo Control Facts, Baldor Motors

[3] RC Servo Basics, engineeringpost.com

[4] Servo vs. Stepper Motors, engineeringpost.com